As you know, I really enjoy making my own Christmas ornaments. Here’s a cute Christmas tree ornament I came up with last week.
All you need is some wire (any gauge sturdy enough to hold its shape but pliable enough to be easily manipulated–I just used some I found in my craft bin in my closet), some beads, and needle nose pliers. I used “starflake” green beads as the main component of this ornament. I find these at A.C. Moore and I have them in green, clear, and red. They’re great for all kinds of Christmas crafts and I’ve NEVER been able to find these beads at any other craft store or online. Then, for the “ornaments” on the tree, I used a mix of random red, green, white, and clear beads I found in my stash. The gold bead at the top is a pony bead. If you don’t have gold, you could use silver, clear, or yellow.
For my ornament, I used a total of 30 green starflake beads, 1 gold pony bead, and 16 random smaller beads to represent mini-ornaments on the tree. I cut about an 11-inch piece of wire for that amount of beads (I like to err on the side of caution) and strung the beads on in a random order. You can absolutely use different amounts of beads than I used if you want a larger ornament. My ornament turned out to be about 3.5″ tall.
To start your ornament, I recommend stringing on the first bead (in my case, a gold pony bead), and then folding the wire back over and twisting it to secure that top bead (see picture). Then, just string on the rest of your beads until the ornament is a large as you want it. Then, snip the wire about 1″ from the last bead and twist that wire into concentric circles as far as you can. Then, I use the tip of the needle nose pliers to push the concentric circles against the bottom of the last bead to lock it in place. The final step is to twist the ornament into a corkscrew and add a ribbon hanger through the top bead. Viola!